Skip to Store Area:

Loja Virtual - Livraria D'Gonçalves

DIN Handbook 140 - 7th Edition 2016 Fasteners 4 Basic and Dimensional Standards for Nuts

Mais Visualizações

DIN Handbook 140 - 7th Edition 2016 Fasteners 4 Basic and Dimensional Standards for Nuts

Enviar para um amigo

Seja o primeiro a comentar este produto

Disponibilidade: Em Estoque.

De: R$2.270,00

Por:
R$2.110,00

Acrescentar itens ao carrinho Comprar

Descrição Rápida

This compilation of national, European and International Standards on nuts and accessories for bolt/nut assemblies contains a total of 95 documents in English, giving a comprehensive picture of the state of the art in Germany, Europe and worldwide. The first section contains basic standards, other sections deal with hexagon nuts, square nuts, castle nuts, cap nuts, prevailing torque type nuts, weld nuts, knurled nuts and miscellaneous nuts. The Handbook forms part of a series of 6 compilations in English dealing with fasteners.
 
Contents: List of Documents Included
Standard
DIN 267-24: 2007-10
Fasteners - Technical delivery conditions - Part 24: Hardness classes for nuts without specified proof load values
DIN 314: 1999-09
Wing nuts - Edged wings
DIN 315: 1998-07
Wing nuts, rounded wings
DIN 431: 2013-05
Pipe nuts with thread according to DIN EN ISO 228-1
  • This standard specifies requirements for size G 1/8 to G 6 (hexagon and octagon) pipe nuts with thread in accordance with DIN EN ISO 228-1 and of product grades B and C. Along with editorial adaptations and amendments, the specifications for stainless steel have been revised with respect to the current standard. The standard has been prepared by Working Committee NA 067-00-03 AA "Verbindungselemente mit metrischem Innengewinde" ("Fasteners with metric internal thread") of the Fasteners Standards Committee (FMV) at DIN.
DIN 466: 2006-08
Knurled nuts, high type
DIN 467: 2006-08
Knurled nuts, low type
DIN 546:2010-09
Slotted round nuts
  • This document has been prepared by the Fasteners Standards Committee (FMV), Working Committee NA 067-03-08 AA "Verbindungselemente mit Sonderformen und aus Kunststoff" ("Fasteners with special elements and made of plastic"). This standard applies to slotted round nuts (M1 to M20).
DIN 547: 2006-08
Round nuts with drilled holes in one face
DIN 548: 2007-01
Round nuts with set pin holes in side
DIN 557: 1994-01
Square nuts; product grade C
DIN 562: 2013-05
Square thin nuts - Product grade B
  • This standard specifies requirements for thin square nuts with metric thread for sizes M1,6 to M10 in product grade B. With respect to the current standard, in addition to editorial adjustments, modifications to the mechanical properties in Table 2 have been made. This standard has been prepared by Working Committee NA 067-00-03 AA "Verbindungselemente mit metrischem Innengewinde" ("Fasteners with metric internal thread") at the Standards Committee Fasteners (FMV) at DIN.
DIN 582: 2010-09
Lifting eye nuts
  • This document has been prepared by Working Committee NA 067-00-08 AA "Verbindungselemente mit Sonderformen und aus Kunststoff" ("Fasteners with special elements and made of plastics") of the Fasteners Standards Committee (FMV). This standard specifies the characteristics of lifting eye nuts made of steel and stainless steel and provides information for their correct use in hoist operations (as part of slings and as a load suspension device). Lifting eye nuts conforming to this standard are suitable for use at temperatures ranging from -20 °C to +200 °C without a reduction in their lifting capacity.
DIN 917: 2015-08
Hexagon cap nuts, low type
DIN 928: 2013-12
Square weld nuts
  • Has been corrected: Customers who have purchased the previous edition of this document DIN 928:2013-05 will receive the correction
DIN 929: 2013-12
Hexagon weld nuts
  • Has been corrected: Customers who have purchased the previous edition of this document DIN 929:2013-05 will receive the correction
DIN 935-1: 2013-08
Hexagon slotted and castle nuts - Part 1: Metric coarse and fine pitch thread, product grades A and B
DIN 935-3: 2013-08
Hexagon slotted nuts - Part 3: Metric coarse pitch thread, product grade C
DIN 962: 2013-04
Bolts, screws, studs and nuts - Designations, types and finishes
  • This standard specifies the designation of bolts, screws, studs and nuts. It also specifies the designations of the types and designs of fasteners that go beyond the basic types specified in the relevant DIN product standards. With respect to the previous standard in Table 2, all types and symbols originating from DIN EN ISO 4753 have been replaced by an example and a reference to DIN EN ISO 4753 and the types Tm (with washer face) and To (without washer face) have been included. This standard has been prepared by Working Committee NA 067-00-01 AA "Referenznormen und Qualitätsmanagement" ("Reference standards and quality management") at the Standards Committee Fasteners (FMV).
DIN 979: 2013-08
Hexagon thin slotted and castle nuts - Metric coarse and fine pitch thread, product grades A and B
DIN 986: 2013-08
Prevailing torque type hexagon domed cap nuts with nonmetallic insert
DIN 1478: 2005-09
Turnbuckles made from steel tubes or round steel bars
DIN 1479: 2005-09
Hexagon turnbuckles
DIN 1480: 2005-09
Forged turnbuckles, (open type)
DIN 1587: 2014-07
Hexagon domed cap nuts, high type
DIN 2510-5: 1971-08
Bolted Connections with Reduced Shank; Hexagon Nuts
DIN 2510-6: 2013-05
Bolted connections with waisted shank - Part 6: Cap nuts
  • This standard specifies the characteristics of cap nuts for bolted connections with waisted shank in product grade T2 with metric coarse thread from M12 to M120x6. With respect to the current standard, the horizontal bottom of bore has been included and figures and designation examples have been revised. This standard has been prepared by Working Committee NA 067-00-03 AA "Verbindungselemente mit metrischem Innengewinde" ("Fasteners with metric internal thread") at the Standards Committee Fasteners (FMV) at DIN.
DIN 2510-7: 1971-08
Bolted Connections with Reduced Shank; Extension Sleeves
DIN 6303: 2006-08
Knurled nuts
DIN 6330: 2003-04
Hexagon nuts with a height of 1,5 d
DIN 6331: 2003-04
Hexagon collar nuts with a height of 1,5 d
DIN 7965: 1965-09
Screwed Inserts (Screw Plugs)
DIN 34814: 1999-09
Plastic hexagon nuts
DIN 34828: 2005-09
Welding studs for turnbuckles
DIN 80705:1990-08
Thin nuts with coarse pitch and fine pitch thread and with small widths across flats
DIN EN 1661: 1998-02
Hexagon nuts with flange (ISO/DIS 4161:1996, modified); German version EN 1661:1997
DIN EN 1663: 1998-02  
Prevailing torque type hexagon nuts with flange (with non-metallic insert) (ISO 7043:1997, modified); German version EN 1663:1997
DIN EN 1664: 1998-02
Prevailing torque type - All-metal hexagon nuts with flange (ISO 7044:1997, modified); German version EN 1664:1997
DIN EN 1666: 1998-02
Prevailing torque type hexagon nuts with flange (with non-metallic insert), with metric fine pitch thread (ISO 12125:1997, modified); German version EN 1666:1997
DIN EN 1667: 1998-02
Prevailing torque type all hexagon nuts with flange, with metric fine pitch thread (ISO 12126:1997, modified); German version EN 1667:1997
DIN EN 14218: 2003-09
Hexagon nuts with flange - Fine pitch thread (ISO 10663:1999, modified); German version EN 14218:2003
DIN EN 14399-2: 2015-04
High-strength structural bolting assemblies for preloading - Part 2: Suitability for preloading; German version EN 14399-2:2015
DIN EN 14399-3: 2015-04
High-strength structural bolting assemblies for preloading - Part 3: System HR - Hexagon bolt and nut assemblies; German version EN 14399-3:2015
DIN EN 14399-4: 2015-04
High-strength structural bolting assemblies for preloading - Part 4: System HV - Hexagon bolt and nut assemblies; German version EN 14399-4:2015
DIN EN ISO 225: 2011-02
Fasteners - Bolts, screws, studs and nuts - Symbols and descriptions of dimensions (ISO 225:2010); Multilingual version EN ISO 225:2010
  • This standard specifies the definitions for the dimensions of bolts, screws, studs and nuts for use in the appropriate product standards and drawings. Along with the update of figures and the incorporation of further dimensions, a supplement of bolts and screws with triple square socket head, stud bolts, set screws with hexolobular socket as well as thread forming screws and thread cutting screw has been incorporated. The European/International standard EN ISO 225 has been prepared by ISO/TC 2 "Fasteners", in collaboration with CEN/TC 185 "Fasteners" (both secretariats: DIN, Germany). The responsible German standardization committee is Working Committee NA 067-00-01 AA "Referenznormen und Qualitätsmanagement" ("Reference standards and quality management") at FMV.
DIN EN ISO 887: 2006-07
Plain washers for metric bolts, screws and nuts for general purposes - General plan (ISO 887:2000 + Cor. 1:2006); German version EN ISO 887:2000 + AC:2006
DIN EN ISO 898-2: 2012-08
Mechanical properties of fasteners made of carbon steel and alloy steel - Part 2: Nuts with specified property classes - Coarse thread and fine pitch thread (ISO 898-2:2012); German version EN ISO 898-2:2012
  • This standard specifies mechanical and physical properties of nuts with coarse thread and fine pitch thread made of carbon steel and alloy steel when tested at an ambient temperature range of 10 °C to 35 °C. Nuts conforming to the requirements of this standard are evaluated at that ambient temperature range. It is possible that they do not retain the specified mechanical and physical properties at elevated and/or lower temperatures. This part of ISO 898 is applicable to nuts made of carbon steel or alloy steel with coarse thread from M5 to M39 and a minimum height of 0,45D as well as a minimum outside diameter or width across flats of 1,45D, which are able to mate with bolts, screws and studs with property classes according to ISO 898-1. With respect to the previous version DIN EN 20898-2:1994-04 the scope has been limited with M5 as the minimum nominal diameter and the nominal diameters M3, M3,5 and M4 and property class 4 have been deleted. The designation system for nut types has been supplemented to include style 0 for thin nuts. The subdivision into nut types for the proof load values has been omitted in that each of the lower proof load values has been deleted. The proof load test and the hardness test have been rendered more precise. The European Standard EN ISO 898-2:2012 has been prepared by ISO/TC 2 "Fasteners" in collaboration with CEN/TC 185 "Fasteners", the secretariats of which are held by DIN (Germany). The responsible German standardization committee is Working Committee NA 067-00-03 AA "Verbindungselemente mit metrischem Innengewinde" ("Fasteners with metric internal thread") at the Fasteners Standards Committee (FMV) at DIN, the German Institute for Standardization e. V.
DIN EN ISO 4032: 2013-04
Hexagon regular nuts (style 1) - Product grades A and B (ISO 4032:2012); German version EN ISO 4032:2012
  • This standard specifies the characteristics of hexagon regular nuts of style 1, with threads from M1,6 up to and including M64 in product grade A for threads, D, up to and including M16 and product grade B for threads, D, above M16. In this revised version the normative references are now undated in order to facilitate the unequivocal use of each currently applicable version of a standard. Moreover, the content of the standard has been brought in line with the revised ISO 898-2. This standard is identical to the European Standard EN ISO 4032:2012 in which the International Standard ISO 4032:2012 was adopted without any modifications. This standard has been prepared by ISO/TC 2 "Fasteners" in collaboration with CEN/TC 185 "Fasteners", both secretariats of which are held by DIN. The responsible German standardization committee is Working Committee NA 067-00-03 AA "Verbindungselemente mit metrischem Innengewinde" ("Fasteners with metric internal thread") of the Fasteners Standards Committee (FMV) at DIN.
DIN EN ISO 4033: 2013-04
Hexagon high nuts (style 2) - Product grades A and B (ISO 4033:2012); German version EN ISO 4033:2012
  • This standard specifies the characteristics of hexagon high nuts (style 2), with threads from M5 up to and including M36, in product grade A for threads, D, up to and including M16 and product grade B for threads, D, above M16. In this revised version the normative references are now undated in order to facilitate the unequivocal use of each currently applicable version of a standard. Moreover, the content of the standard has been brought in line with the revised ISO 898-2. This standard is identical to the European Standard EN ISO 4033:2012 in which the International Standard ISO 4033:2012 was adopted without any modifications. This standard has been prepared by ISO/TC 2 "Fasteners" in collaboration with CEN/TC 185 "Fasteners", both secretariats of which are held by DIN. The responsible German standardization committee is Working Committee NA 067-00-03 AA "Verbindungselemente mit metrischem Innengewinde" ("Fasteners with metric internal thread") of the Fasteners Standards Committee (FMV) at DIN.
DIN EN ISO 4035: 2013-04
Hexagon thin nuts chamfered (style 0) - Product grades A and B (ISO 4035:2012); German version EN ISO 4035:2012
  • This International Standard specifies the characteristics of chamfered hexagon thin nuts (style O), with threads from M1,6 up to and including M64 in product grade A for threads, D, up to an including M16 and product grade B for threads, D, above M16. In this revised version the normative references are now undated in order to facilitate the unequivocal use of each currently applicable version of a standard. Moreover, the content of the standard has been brought in line with the revised ISO 898-2. This standard is identical to the European Standard EN ISO 4035:2012 in which the International Standard ISO 4035:2012 was adopted without any modifications. This standard has been prepared by ISO/TC 2 "Fasteners" in collaboration with CEN/TC 185 "Fasteners", both secretariats of which are held by DIN. The responsible German standardization committee is Working Committee NA 067-00-03 AA "Verbindungselemente mit metrischem Innengewinde" ("Fasteners with metric internal thread") of the Fasteners Standards Committee (FMV) at DIN.
DIN EN ISO 4036: 2013-04
Hexagon thin nuts unchamfered (style 0) - Product grade B (ISO 4036:2012); German version EN ISO 4036:2012
  • This International Standard specifies the characteristics of unchamfered hexagon thin nuts (style 0), with threads from M1,6 up to and including M10 and product grade B. In this revised version the normative references are now undated in order to facilitate the unequivocal use of each currently applicable version of a standard. Moreover, the content of the standard has been brought in line with the revised ISO 898-2. This standard is identical to the European Standard EN ISO 4036:2012 in which the International Standard ISO 4036:2012 was adopted without any modifications. This standard has been prepared by ISO/TC 2 "Fasteners" in collaboration with CEN/TC 185 "Fasteners", both secretariats of which are held by DIN. The responsible German standardization committee is Working Committee NA 067-00-03 AA "Verbindungselemente mit metrischem Innengewinde" ("Fasteners with metric internal thread") of the Fasteners Standards Committee (FMV) at DIN.
DIN EN ISO 4759-1: 2001-04
Tolerances for fasteners - Part 1: Bolts, screws, studs and nuts; Product grades A, B and C (ISO 4759-1:2000); German version EN ISO 4759-1:2000
DIN EN ISO 4759-3: 2000-09
Tolerances for fasteners - Part 3: Plain washers for bolts, screws and nuts; product grades A and C (ISO 4759-3:2000); German version EN ISO 4759-3:2000
DIN EN ISO 6157-2: 2004-10
Fasteners - Surface discontinuities - Part 2: Nuts (ISO 6157-2:1995); German version EN ISO 6157-2:2004
DIN EN ISO 7040: 2013-04
Prevailing torque type hexagon regular nuts (with non-metallic insert) - Property classes 5, 8 and 10 (ISO 7040:2012); German version EN ISO 7040:2012
  • This International Standard specifies the characteristics of prevailing torque type hexagon regular nuts (with non-metallic insert), with threads from M3 up to and including M36, in product grade A for threads up to and including M16 and product grade B for threads above M16, and with property classes 5, 8 and 10. In this revised version the normative references are now undated in order to facilitate the unequivocal use of each currently applicable version of a standard. Moreover, the content of the standard has been brought in line with the revised ISO 898-2. This standard is identical to the European Standard EN ISO 7040:2012 in which the International Standard ISO 7040:2012 was adopted without any modifications. This standard has been prepared by ISO/TC 2 "Fasteners" in collaboration with CEN/TC 185 "Fasteners", both secretariats of which are held by DIN. The responsible German standardization committee is Working Committee NA 067-00-03 AA "Verbindungselemente mit metrischem Innengewinde" ("Fasteners with metric internal thread") of the Fasteners Standards Committee (FMV) at DIN.
DIN EN ISO 7719: 2013-04
Prevailing torque type all-metal hexagon regular nuts - Property classes 5, 8 and 10 (ISO 7719:2012); German version EN ISO 7719:201
  • This International Standard specifies the characteristics of prevailing torque type (all-metal) hexagon regular nuts, with threads from M5 up to and including M36, in product grade A for threads up to and including M16 and product grade B for threads above M16, and with property classes 5, 8 and 10. In this revised version the normative references are now undated in order to facilitate the unequivocal use of each currently applicable version of a standard. Moreover, the content of the standard has been brought in line with the revised ISO 898-2. This standard is identical to the European Standard EN ISO 7719:2012 in which the International Standard ISO 7719:2012 was adopted without any modifications. This standard has been prepared by ISO/TC 2 "Fasteners" in collaboration with CEN/TC 185 "Fasteners", both secretariats of which are held by DIN. The responsible German standardization committee is Working Committee NA 067-00-03 AA "Verbindungselemente mit metrischem Innengewinde" ("Fasteners with metric internal thread") of the Standards Committee Fasteners (FMV) at DIN.
DIN EN ISO 8673: 2013-04
Hexagon regular nuts (style 1) with metric fine pitch thread - Product grades A and B (ISO 8673:2012); German version EN ISO 8673:2012
  • This International Standard specifies the geometry of hexagon nuts with nominal thread diameter from 8 mm up to and including 64 mm and the mechanical properties of hexagon regular nuts (style 1) with metric fine pitch thread in product grade A for nominal thread diameter, D, up to and including 16 mm and in product grade B for nominal diameter, D, above 16 mm and up to and including 39 mm. In this revised version the normative references are now undated in order to facilitate the unequivocal use of each currently applicable version of a standard. Moreover, the content of the standard has been brought in line with the revised ISO 898-2. This standard is identical to the European Standard EN ISO 8673:2012 in which the International Standard ISO 8673:2012 was adopted without any modifications. This standard has been prepared by ISO/TC 2 "Fasteners" in collaboration with CEN/TC 185 "Fasteners", both secretariats of which are held by DIN. The responsible German standardization committee is Working Committee NA 067-00-03 AA "Verbindungselemente mit metrischem Innengewinde" ("Fasteners with metric internal thread") of the Fasteners Standards Committee (FMV) at DIN.
DIN EN ISO 8674: 2013-04
Hexagon high nuts (style 2) with metric fine pitch thread - Product grades A and B (ISO 8674:2012); German version EN ISO 8674:2012
  • This International Standard specifies the characteristics of hexagon high nuts (style 2) with metric fine pitch thread, with nominal thread diameters, D, from 8 mm up to and including 36 mm. Product grade A is applicable for nominal thread diameter, D, up to and including 16 mm and product grade B is applicable for nominal thread diameter, D, above 16 mm. In this revised version the normative references are now undated in order to facilitate the unequivocal use of each currently applicable version of a standard. Moreover, the content of the standard has been brought in line with the revised ISO 898-2. This standard is identical to the European Standard EN ISO 8674:2012 in which the International Standard ISO 8674:2012 was adopted without any modifications. This standard has been prepared by ISO/TC 2 "Fasteners" in collaboration with CEN/TC 185 "Fasteners", both secretariats of which are held by DIN. The responsible German standardization committee is Working Committee NA 067-00-03 AA "Verbindungselemente mit metrischem Innengewinde" ("Fasteners with metric internal thread") of the Fasteners Standards Committee (FMV) at DIN.
DIN EN ISO 8675: 2013-04
Hexagon thin nuts chamfered (style 0) with metric fine pitch thread - Product grades A and B (ISO 8675:2012); German version EN ISO 8675:2012
  • This International Standard specifies the characteristics of chamfered hexagon thin nuts (style 0), with metric fine pitch thread, with nominal thread diameters, D, from 8 mm up to and including 64 mm. Product grade A is applicable for nominal thread diameter, D, up to and including 16 mm and product grade B is applicable for nominal thread diameter, D, above 16 mm. In this revised version the normative references are now undated in order to facilitate the unequivocal use of each currently applicable version of a standard. Moreover, the content of the standard has been brought in line with the revised ISO 898-2. This standard is identical to the European Standard EN ISO 8675:2012 in which the International Standard ISO 8675:2012 was adopted without any modifications. This standard has been prepared by ISO/TC 2 "Fasteners" in collaboration with CEN/TC 185 "Fasteners", both secretariats of which are held by DIN. The responsible German standardization committee is Working Committee NA 067-00-03 AA "Verbindungselemente mit metrischem Innengewinde" ("Fasteners with metric internal thread") of the Fasteners Standards Committee (FMV) at DIN.
DIN EN ISO 10511: 2013-05
Prevailing torque type hexagon thin nuts (with non-metallic insert) (ISO 10511:2012); German version EN ISO 10511:2012
  • This International Standard specifies the characteristics of prevailing torque type hexagon thin nuts (with non-metallic insert) with thread from M3 up to and including M36, in product grade A for threads up to and including M16 and product grade B for threads above M16, and with property classes 04 and 05. The dimensions of the nuts correspond to those given in ISO 4035 plus prevailing torque feature. In this revised version the normative references are now undated in order to facilitate the unequivocal use of each currently applicable version of a standard. Moreover, the content of the standard has been brought in line with the revised ISO 898-2. This standard is identical to the European Standard EN ISO 10511:2012 in which the International Standard ISO 10511:2012 was adopted without any modifications. This standard has been prepared by ISO/TC 2 "Fasteners" in collaboration with CEN/TC 185 "Fasteners", both secretariats of which are held by DIN. The responsible German standardization committee is Working Committee NA 067-00-03 AA "Verbindungselemente mit metrischem Innengewinde" ("Fasteners with metric internal thread") of the Fasteners Standards Committee (FMV) at DIN.
DIN EN ISO 10512: 2013-05
Prevailing torque type hexagon regular nuts (with non-metallic insert) with metric fine pitch thread - Property classes 6, 8 and 10 (ISO 10512:2012); German version EN ISO 10512:2012
  • This International Standard specifies the characteristics of prevailing torque type hexagon regular nuts (with non-metallic insert), style 1, with metric fine pitch thread with nominal thread diameters, D, from 8 mm up to and including 36 mm, in product grade A for sizes, D, up to and including 16 mm and product grade B for sizes, D, above 16 mm, and with property classes 6, 8 and 10. The dimensions of the nuts correspond to those given in ISO 8673 plus prevailing torque feature. In this revised version the normative references are now undated in order to facilitate the unequivocal use of each currently applicable version of a standard. Moreover, the content of the standard has been brought in line with the revised ISO 898-2. This standard is identical to the European Standard EN ISO 10512:2012 in which the International Standard ISO 10512:2012 was adopted without any modifications. This standard has been prepared by ISO/TC 2 "Fasteners" in collaboration with CEN/TC 185 "Fasteners", both secretariats of which are held by DIN. The responsible German standardization committee is Working Committee NA 067-00-03 AA "Verbindungselemente mit metrischem Innengewinde" ("Fasteners with metric internal thread") of the Fasteners Standards Committee (FMV) at DIN.
DIN EN ISO 10513: 2013-05
Prevailing torque type all-metal hexagon high nuts with metric fine pitch thread - Property classes 8, 10 and 12 (ISO 10513:2012); German version EN ISO 10513:2012
  • This International Standard specifies the characteristics of prevailing torque type (all-metal) hexagon high nuts with metric fine pitch thread, with nominal thread diameters, D, from 8 mm up to and including 36 mm, in product grade A for sizes, D, up to and including 16 mm and product grade B for sizes, D, above 16 mm, and with property classes 8, 10 and 12. In this revised version the normative references are now undated in order to facilitate the unequivocal use of each currently applicable version of a standard. Moreover, the content of the standard has been brought in line with the revised ISO 898-2. This standard is identical to the European Standard EN ISO 10513:2012 in which the International Standard ISO 10513:2012 was adopted without any modifications. This standard has been prepared by ISO/TC 2 "Fasteners" in collaboration with CEN/TC 185 "Fasteners", both secretariats of which are held by DIN. The responsible German standardization committee is Working Committee NA 067-00-03 AA "Verbindungselemente mit metrischem Innengewinde" ("Fasteners with metric internal thread") of the Fasteners Standards Committee (FMV) at DIN.
DIN EN ISO 21670: 2014-09
Fasteners - Hexagon weld nuts with flange (ISO 21670:2014); German version EN ISO 21670:2014
 
Other  titles in the series: 
DIN Handbook 10 - 8th Edition 2017 Fasteners 1: Dimensional standards for bolts, screws and studs; National Standards
DIN Handbook 43 - 4th Edition 2012 Fasteners 2 Standards for Pins, Rivets, Keys, Adjusting and Retaining Rings
DIN Handbook 55 - 5th Edition 2014 Fasteners 3 Standards for technical delivery conditions for bolts, screws, nuts and washers
DIN Handbook 140 - 7th Edition 2016 Fasteners 4 Basic and Dimensional Standards for Nuts
DIN Handbook 193 - 3rd edition 2011 Fasteners 5 Basic Standards
DIN Handbook 362 - 2nd Edition 2012 Fasteners 6 Dimensional Standards for Bolts and Screws - European Standards
DIN Handbook 45 - 2018 Threads for Engineering: Basic Standards
DIN Manual 10 Elementos de Fixação Mecânica I Parafusos e Porcas: Normas de Dimensionamento
DIN Taschenbuch 140 - 10th Edition 2016 Mechanische Verbindungselemente 4 Muttern, Zubehörteile für Schraubenverbindungen
Fastener Standards IFI, 10th Edition 2018
JIS Handbook: Fasteners & Screw Threads, Edition 2016



DIN Handbook 140
Fasteners 4 Basic and Dimensional Standards for Nuts 
Edition: 7th Edition 2016
Publication date: April 2016
Format: Paper covers, 756 pages, Size A5.
Product code: 24531
BOOK: ISBN: 978-3-410-24531-5 / 9783410245315
e-Book: ISBN 978-3-410-24532-2 / 9783410245322
Availability: Produto importado, usualmente enviamos em até 4 semanas + prazo do frete. e-Book: a entrega será em até uma semana.
 
Importante:
Os preços estão sujeitos a alteração sem aviso prévio.
Os pedidos ficam condicionados a disponibilidade do estoque de nossa empresa e de nossos fornecedores.
.
* * Att.: **
To order the combined version for printed book plus eBook, you must add 30%. Deposit the amount in the Bank of Brazil Agency 6858-6 Account 874-5. To buy this combined version please send this request to: Ldgoncalves@uol.com.br
 
Acrescentar suas Tags:
Acrescentar Tags
Utilize espaços para separar tags. Utilize aspas simples (') para frases.